Smoke generator DragON Jet 1 with electric pump

Smoke generator DragON Jet 1 with electric pump

The use of a smoke generator ensures excellent quality and efficiency of the smoking process.

The generator can be installed in both large and small smokehouses. Tests were performed with a 300-liter smokehouse.

Universal stainless steel smoke generator suitable for any smokehouse - this weatherproof smoke generator can be installed in a steel, wooden or brick smokehouse.

Innovative nozzle - its correctly cut end construction, the special angled tube and the attached pump ensure perfect, even smoke discharge in the smokehouse and provide high efficiency with low consumption of wood chips.

Simple assembly and disassembly – the used design solutions allow you to quickly and conveniently connect the generator to the smokehouse and prepare it for operation.

Capacious body (pipe) - allows you to put about 450g of wood chips in the generator for smoking (recommended size of the chip fraction 8-12 mm). This amount of wood chips allows you to smoke for several hours without the need to add additional wood chips.

Easy cleaning – the smoke generator can be easily disassembled and cleaned without unscrewing its base from the smokehouse and without using any tools.

The smoke generator is equipped with an electric, green pump with a power of 3.8W and a productivity of 2x200 l/h.

Thanks to an efficient electric pump with variable air flow, optimizing chip burning efficiency, you can forget about unburnt wood chips!

By placing the pump on a special mounting base, the vibrations generated by it are transferred directly to the combustion chamber, thus improving chip shedding during combustion.

The efficiency of the pump can be adjusted with a crank, adjusting the amount of smoke according to the needs of the smokehouse and its volume.

The pump can be used not only in the fumigation process, but also for aerating aquariums of different sizes.

Cleaning: After each smoke, clean the generator, especially the inside, so that it is completely ready for the next use and ensures proper smoke flow.

Set elements:

- wooden cover

- AISI304 stainless steel smoke generator cylinder (smoke delivery body)

- electric pump (3.8 W)

- smoke generator nozzle with angle pipe

- stainless steel mounting base

- connection kit (silicone hoses)

- stainless steel washer M8 - 4 pcs.

- stainless steel screw M8x40 - 2 pcs. (up to 3 cm wall thickness, in case of greater thickness, appropriate screws must be selected)

- stainless nut M8 - 2 pcs.

- manual

- packaging with wood chips

Dimensions of the smoke generator in the assembled state:

Height: 334 mm

Width: 152 mm

Length: 313 mm