Electric transfer pump BE-M 20 IP55 waterproof Rover Pompe

The product is currently unavailable

Electric transfer pump BE-M 20 IP55 waterproof Rover Pompe

Self-priming liquid ring pump, with star geometry impeller, equipped with a double direction of rotation as standard, with a high efficiency motor calculated to operate in continuous service. The particular hydraulic geometry allows the pump to work even in the presence of air bubbles in the suction liquid.

The liquid ring pump obtains the suction capacity by simply filling the pump body through one of the hose holders - the suction capacity is active on both directions of rotation.

It is possible to use the pump to transfer any type of clean liquid in common use, which must not be chemically aggressive or abrasive. Some examples: water, wine, milk, vinegar, low viscosity oily solutions, neutral fluid detergents, diesel. The viscosity of the liquid must not be greater than 4 cps for continuous service with free flow, and must not exceed 20 cps for intermittent service with free flow and the presence of an operator for surveillance.

Service: 

Normal maintenance requires few and simple interventions, as if it were a normal household appliance. 

After use, pour clean water to rinse the internal surfaces of the pump. 

The electric motor requires no maintenance, there are no parts to lubricate. 

The external parts must be cleaned with a slightly damp sponge, and then dried immediately with a cloth.

Electrical connection: 230 V

Productivity: 28 liters / minute

Outlets: Ø20 mm

Electric motor power: 0.5 hp

Pumpable height: up to 22 m

Number of revolutions: 2850 / min

Suitable for liquids up to 35°C

Water resistance: IP 55

Noise power: 69 dB

Weight: 5 kg

Size: 230 x 120 x h190

The product is currently unavailable